Item # 22, Osprey™ 93.00 Inch (in) Diameter (A) Gravity Strainer On Vooner FloGard Corporation

No trapping or driving solids through screen openings.
Fibers that "staple" are continuously removed by bottom up spray showers.
Easy visual performance check, inspection and infrequent maintenance. (1-2/years)
Performance can be "Fine Tuned" (variable speed motor) for change in concentration or flow rate.
Easy to install, self-contained modular unit.
Small floor space compared to a number of inline strainers.

Unit of Measure

Specifications | Bottom Up vs Top Down Cleaning | Updated Design Improvements | To Size your Strainer, We Need from You: | Additional Information

Brands	N/A Osprey™ Vooner FloGard®
Diameter (A)	N/A 93.00 in
Diameter (A) Tolerance (±)	N/A 0.25 in
Height (B)	N/A 76.00 in
Height (B) Tolerance (±)	N/A 0.25 in
Minimum Clearance above Spray Water Feed (C)	N/A 20.00 in
Minimum Clearance above Spray Water Feed (C) Tolerance (±)	N/A 0.25 in
Approximate Gross Weight	N/A 3,800 lb
Approximate Gross Weight Tolerance (±)	N/A 50 lb
Strainer Type	N/A Gravity Self Cleaning

N/A Bottom Up Spray
Lifts fibers/debris off of screen with continuous backwash cleaning

Top Down Spray
Sweeps debris/fibers across screen to a central collection point

Forces debris/fibers into and through the screen
Increases potential for clogging and stapling of fibers over wires of mesh
Smaller mesh screen. Screen is required to prevent particles from passing through.

N/A For Ease of Maintenance with:

For Ease of Operation with:

To Size your Strainer, We Need from You

N/A

N/A